51111 sy/n1908 ms pc 20081016-s00007 no.a1341-1/7 specifications of any and all sanyo semiconductor co.,l td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' sproductsor equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general el ectronics equipment (home appliances, av equipment, communication device, office equipment, industrial equ ipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of re liability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use. LV8413GP overview the LV8413GP is an h-bridge 2-channel motor driver ic and is able to control 4 modes of forward, reverse, brake, and standby. this ic housed in a miniature package is optimum for use in a stepping motor driving system for dsc or a camera module of cell phones. features ? saturation drive h-bridge : 2-channels ? built-in thermal protection circuit ? built-in low voltage malfunction prevention circuit ? incorporates a transistor for driving photosensors specifications absolute maximum ratings at ta = 25 c parameter symbol conditions ratings unit power supply voltage 1 vm max 6v power supply voltage 2 v cc max 6v output peak current i o peak outs 1 to 4, t 10msec, on-duty 20% 600 ma output continuous current 1 i o max1 outs 1 to 4 400 ma output continuous current 2 i o max2 pi 15 ma allowable power dissipation pd max mounted on a circuit board* 0.7 w operating temperature topr -20 to +85 c storage temperature tstg -55 to +150 c * specified circuit board : 50.0mm 40.0mm 0.8mm : glass epoxy four-layer board (2s2p) bi-cmos lsi for dsc, and cell phone camera modules h-bridge 2-channel motor driver orderin g numbe r : ena1341a
LV8413GP no.a1341-2/7 recommended operating conditions at ta = 25 c parameter symbol conditions ratings unit power supply voltage range 1 vm 2.5 to 5.5 v power supply voltage range 2 v cc 2.5 to 5.5 v logic input voltage range v in 0 to v cc +0.3 v input frequency f in in1 to 4, ina to 100 khz electrical characteristics at ta = 25c, vm = 5v, v cc = 3.3v, unless otherwise specified. ratings parameter symbol conditions min typ max unit standby mode current drain istn in1 to 4 = ?l? 1.0 a vm current drain im any one of in 1 to 4 = ?h?, with no load 70 150 a v cc current drain i cc any one of in1 to 4 = ?h? 0.6 1.2 ma v cc low-voltage cutoff voltage vthv cc 1.85 2.10 2.35 v low-voltage hysteresis vo ltage vthhys 100 150 200 mv thermal shutdown temperature tsd design guarantee value * 160 180 200 c thermal hysteresis width tsd design guarantee value * 10 30 50 c out1 to 4 logic pin internal pull-down resistance rin in1 to 4 50 100 200 k iinl v in = 0, in1 to 4 1.0 a logic pin input current iinh v in = 3.3v, in1 to 4 20 33 60 a logic input high-level voltage vinh in1 to 4 2.5 v logic input low-level voltage vinl in1 to 4 1.0 v ronu i o = 400ma, upper on resistance 0.5 0.8 output on-resistance rond i o = 400ma, lower on resistance 0.3 0.5 output leakage current i o leak 1 a diode forward voltage vd id = -400ma 1.0 v pi logic pin internal pull-down resistance rin ina 50 100 200 k iinl v in = 0, ina 1.0 a logic pin input current iinh v in = 3.3v, ina 20 33 50 a logic input high-level voltage vinh ina 2.5 v logic input low-level voltage vinl ina 1.0 v output on-resistance ron i o = 10ma 4 6 output leakage current i o leak 1 a
LV8413GP no.a1341-3/7 package dimensions unit : mm (typ) 3318 pin assignment 2.6 2.6 0.4 0.8 0.25 (0.035) side view side view bottom view top view laser marked index 0.5 (0.55) (c0.116) (0.13) (0.125) 1 2 16 sanyo : vct16(2.6x2.6) pd max ? ta 0 0.7 0.6 0.4 0.2 0.8 ? 20 80 85 60 20 40 0 100 ambient temperature, ta ? c allowable power dissipation, pd max ? w specified board : 50.0 40.0 0.8mm 3 4-layer glass epoxy (2s2p) pi 13 in2 1 in1 2 vm 3 pgnd 4 sgnd 12 v cc 11 10 vm pgnd 9 ina 14 in4 15 in3 16 out1 8 out2 7 out3 6 out4 5 top view LV8413GP
LV8413GP no.a1341-4/7 block diagram logic circuit cpu out2 out1 vm vm v cc v cc + - pgnd pgnd out4 out3 + - sgnd in1 in2 pi in3 in4 ina 15ma max lvs circuit thermal shutdown circuit
LV8413GP no.a1341-5/7 pin functions pin no. pin name pin function equivalent circuit 2 1 16 15 14 in1 in2 in3 in4 ina control signal input pin control signal input pin control signal input pin control signal input pin control signal input pin v cc gnd 10k 100k 8 7 6 5 out1 out2 out3 out4 outpin outpin outpin outpin vm pgnd 13 pi outpin gnd 11 v cc logic system power supply connection pin 3 10 vm vm motor power supply connection pin motor power supply connection pin 12 sgnd signal ground 4 9 pgnd pgnd power ground power ground
LV8413GP no.a1341-6/7 logic input specifications ? common channels 1 to 2 ch1 : in1 to in2, out1 to out2 ch2 : in3 to in4, out3 to out4 input output in1 in2 out1 out2 operation mode l l off off standby h l h l cw (forward) l h l h ccw (reverse) h h l l brake ? output stage transistor function vm on on off off (forward) vm on on off off (reverse) vm off off on on (brake) ? photo sensor driving transistor when thermal shutdown and v cc low-voltage cut circuits are activated, out1 through out4 are turned off under control of the internal circuit. but the output (pi) of photo sensor driving transistor continues operation. input ina photo sensor driving pi l off h on
LV8413GP ps no.a1341-7/7 sanyo semiconductor co.,ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probabi lity. it is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. when designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. upon using the technical information or products descri bed herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagr ams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equi pment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor c o.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities conc erned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. this catalog provides information as of may, 2011. specifications and inform ation herein are subject to change without notice.
|
